Skip to content
SEINA-3D
  1. Case 01

    FARO L-28: melt jet premixing

    Melt mass
    175 kg
    Melt temperature
    3053 K
    Jet diameter
    44 mm
    Water depth
    1.44 m
    Pressure
    0.51 MPa

    A 44 mm jet of UO₂–ZrO₂ melt at 3053 K pours into 1.44 m of saturated water at 0.51 MPa. Between 2.9 s and 8.0 s the jet keeps breaking up, the fragments quench, and a debris bed builds up on the floor.

    Open the 4-D view

  2. Case 02

    KROTOS K42: steam explosion

    Melt mass
    1.54 kg
    Melt temperature
    2465 K
    Water depth
    1.13 m
    Peak overpressure
    64.8 MPa
    Time shown
    0–2 ms

    A 1.54 kg alumina–water premixture is set off by a trigger at 0.35 m. Within 2 ms a pressure wave runs up and down the premixture, the 4 mm melt drops shed fine fragments that cool within a millisecond, and steam lifts the pool above its 1.13 m water level. The premixture and the trigger are prescribed, based on KROTOS K42.

    Open the 4-D view