What the module models
Strong phase change and rapid fragmentation couple fluid pressure, phase velocities, volume fractions, and internal energies within every time step: boiling expansion accelerates the surrounding pool, while local pressurization alters vapor density, saturation temperature, and acoustic wave speed. In SEINA-3D v1, this module solves for a single common pressure across all five Eulerian fields while enforcing total volume closure and thermodynamic consistency for water, steam, and melt.
Governing equations
Water and steam properties—density , temperature , saturation temperature , latent heat, and isothermal compressibility—are evaluated from the IAPWS-IF97 industrial formulation across liquid, superheated vapor, saturation, and high-pressure regions. Corium and simulant oxide melts use piecewise enthalpy–temperature relations spanning solid sensible heat, latent heat of fusion between solidus and liquidus temperatures, and liquid sensible heat.
Dividing each semi-discrete mass conservation equation by its phase density and summing over all five fields eliminates the end-of-step volume-fraction sum via . Introducing the pressure correction at outer iteration yields the multiphase pressure-correction equation:
Here links face velocity corrections to the cell-centred pressure increment, and collects net convective volume efflux, phase-change dilation , and any residual deviation in .
Numerical method
SEINA-3D v1 advances each time step with an improved multiphase SIMPLEPC pressure-correction iteration on a three-dimensional staggered Cartesian grid:
- Interfield source and momentum prediction: drag matrices (treated semi-implicitly across co-located velocity faces to remove small-droplet relaxation stiffness), heat fluxes, and phase-change sources are evaluated from iterate to obtain predicted face velocities .
- Elliptic–parabolic pressure correction: the linear system for is solved across the three-dimensional grid, smoothly bridging nearly incompressible liquid regions and highly compressible vapor or two-phase mixture zones.
- Conservative variable relaxation: predicted state variables are relaxed onto iterate according to their conservation role:
Conserved mass, volume fraction, and internal energy use unrelaxed updates () to preserve discrete balances, whereas momentum and common pressure use under-relaxation () to stabilize strong boiling feedback. Up to outer corrections are performed per time step until the normalized global continuity residual falls below , while convective and acoustic stability limits adapt between millisecond steps in premixing and sub-microsecond steps during steam-explosion propagation.
Verification
- Incompressible and free-surface pressure coupling: verified against the SPHERIC Test 2 three-dimensional dam-break impact benchmark (median pressure normalized root-mean-square error of across P1–P8) and Ransom faucet flow ( steady mass-flux error) in Sun et al. (2027).
- Closed-vessel boiling pressurization: verified against the FARO L-24 high-pressure corium–water test ( initial pressure rising to predicted peak compared with measured, root-mean-square error ) in Sun et al. (2027).
- Supercritical explosion wave propagation: verified in three-dimensional triggered explosion calculations reaching tens of megapascals in the accepted study of Sun et al..