Skip to content
SEINA-3D
All papers

Published2027

Development and validation of the premixing-phase model in the three-dimensional fuel–coolant interaction code SEINA-3D

Ruiyu Sun, Qianxi Xiao, Ronghua Chen, Kui Zhang, Wenxi Tian

Annals of Nuclear Energy

doi:10.1016/j.anucene.2026.112926

Overview

The paper develops the SEINA-3D model for premixing, the stage when molten fuel breaks up and mixes with coolant before a possible steam explosion. The model tracks liquid water, vapor, the connected melt jet, droplets, and fragments together.

The authors checked the solver against benchmarks for fluid transport, free-surface motion, and bubble rise, then compared the full model with the FARO L-24 corium–water experiment. In the steam-only calculation, the predicted pressure peaked at 2.16 MPa, compared with 2.25 MPa in the experiment. The three-dimensional results show how the connected jet breaks up and how melt collects on the vessel floor.

Simulated FARO L-24 premixing at 0.75 and 1.80 seconds, with three-dimensional cutaways above matched vertical sections.
FARO L-24 simulation at 0.75 s and 1.80 s. The cutaways and matched vertical sections show the connected jet, droplets, fragments, vapor envelope, and deposited melt. Source: Figure 10, Sun et al. (2027).